Ethernet motion controllers.
Designfax • August, 2005 • Motion Spotlight: Motors & Drives
The AMP-20542 low inductance servo motor option for this
company's DMC-21x3 series of Ethernet motion controllers directly
attaches to the 96-pin connector of the controller, eliminating cabling
concerns. The option contains 4 transconductance PWM amplifiers for
driving small brush/brushless servos. Each amplifier operates at 18 to
60 VDC up to 3.3A continuous, 5A peak. It is software configurable.
Galil Motion Control, Rocklin, CA Circle 130, or
www.rsleads.com/508df-130
[ILLUSTRATION OMITTED]
COPYRIGHT 2005 Nelson
Publishing Reproduced with permission of the copyright holder. Further reproduction or distribution is prohibited without permission.
Copyright 2005, Gale Group. All rights
reserved. Gale Group is a Thomson Corporation Company.
NOTE: All illustrations and photos have been removed from this article.