Test solution addresses MIPI D-PHY
interconnects.
MIPI D-PHY is a Mobile Industry Processor Interface protocol test
solution that supports the Camera Serial Interface (CSI-2) and the
Display Serial Interface (DSI) for mobile devices. This solution, based
on Agilent's 16900 Logic Analyzer (LA) platform, facilitates MIPI
D-PHY hardware and software debug and reduces interoperability testing.
[ILLUSTRATION OMITTED]
The N4851A Acquisition Probe and the N4861A Stimulus Probe operate
in conjunction with 16800 and 16900 LAs. Both the real-time analysis
hardware and the stimulus hardware provide bit-level to image-level test
capabilities, hierarchical protocol display, real-time error detection,
and automated tools for test-vector generation for simulating,
troubleshooting, and verifying designs.
Features include an easy trigger setup with a predefined pattern
library, full custom traffic generation, capture and replay
capabilities, and multilevel sequencing to trigger the analyzer on
complex event conditions. Agilent Technologies,
www.rsleads.com/803ee-192
COPYRIGHT 2008 Nelson
Publishing Reproduced with permission of the copyright holder. Further reproduction or distribution is prohibited without permission.
Copyright 2008 Gale, Cengage Learning. All rights
reserved. Gale Group is a Thomson Corporation Company.
NOTE: All illustrations and photos have been removed from this article.