Interlocking floor tiles.
ESD-safe interlocking floor tiles come in coin-top and smooth-top
styles. No glue or copper strips are needed to install tiles over
pre-existing floor coverings or concrete. They measure 23.75" x
23.75". The electrical resistance is 1 x [10.sup.6] to 1 x
[10.sup.9] [ohm] with a staticdecay rate of <0.2 s or 2.5 x
[10.sup.4] to 1 x [10.sup.6] [ohm] with decay of <0.01 s. Tiles can
be disassembled and moved. The recycled plastic content is 5% or 10%
minimum for LEED points. All-Spec Industries, www.rsleads.com/803ee-199
[ILLUSTRATION OMITTED]
COPYRIGHT 2008 Nelson
Publishing Reproduced with permission of the copyright holder. Further reproduction or distribution is prohibited without permission.
Copyright 2008 Gale, Cengage Learning. All rights
reserved. Gale Group is a Thomson Corporation Company.
NOTE: All illustrations and photos have been removed from this article.