SG-SOIC-3000 ZIF Sockets are compact and can be mounted on a small
footprint requiring about 2.5-mm extra space around the chip. Features
include short signal path (0.5 or 0.75 mm), signal loss <1 dB at 6.5
or 10 GHz, and contact resistance of typically 23 m[ohm] per lead. The
sockets can be mounted using hardware and holes for screws on the target
board. Epoxy mount is an option if holes cannot be drilled. Ironwood
Electronics, www.rsleads.com/804ee-185
[ILLUSTRATION OMITTED]
COPYRIGHT 2008 Nelson
Publishing Reproduced with permission of the copyright holder. Further reproduction or distribution is prohibited without permission.
Copyright 2008 Gale, Cengage Learning. All rights
reserved. Gale Group is a Thomson Corporation Company.
NOTE: All illustrations and photos have been removed from this article.
Browse by Journal Name: