Easy drill length adjustment.

SDM Tool Holders feature one-touch drill length adjustment without the need for tools. Drill projection length can be adjusted by handrotating the knurled guide ring on the outside of the SDM Toolholder. Axial adjustment range varies from about 0.394" to 0.984", depending on the size of the given tool holder. The tool holders use the FDC Collet System, which provides run-out accuracy to be within 0.0002" at 4xD, for AA Class collets. FDC Collets are available from stock in sizes ranging from 0.020" to 0.866". The collets can accommodate coolant pressure as high as 1,000 psi either through the drill or alongside the drill. To prevent cutting tools with tangs from rotating within the toolholder, the tool holders include a preset screw. They are available from stock in CAT, BT, and HSK styles. NT Tool, Booth F-2160

[ILLUSTRATION OMITTED]

www.rsleads.com/808mn-185