Bridge type machining center.
Editor's note: An incorrect version of this article was
published in the August Tooling & Production IMTS preview issue. The
following is the corrected version:
[ILLUSTRATION OMITTED]
The RB-200F Series 5-Axis Bridge Type Machining Center from SNK
America offers efficient and accurate machining of multiple angles and
3D contours.
Offering large spindle head and ram assemblies, as well as cast
iron, cast steel, and steel weldment construction, SNK's RB-F
Series provides rigid and precise operation. The RB-F spindle (30/25kW,
40 to 10,000rpm or 55/50kW, 150 to 15,000rpm) offers ample power for
machining of monolithic aerospace parts. The combination of this ISO 50
taper spindle and a 394ipm or optional 590ipm cutting feedrate (X, Y)
enables high-speed cutting. SNKAmeriea, IMTS Booth A-8432, www.
rsleads.com/809tp-165
COPYRIGHT 2008 Nelson
Publishing Reproduced with permission of the copyright holder. Further reproduction or distribution is prohibited without permission.
Copyright 2008 Gale, Cengage Learning. All rights
reserved. Gale Group is a Thomson Corporation Company.
NOTE: All illustrations and photos have been removed from this article.