Improved slat cleaner model.(New Products)

The TSC 2 slat cleaner removes slag from the slats of laser cutting machines. It is the successor to the TSC 1 slat cleaner which was introduced in 2006. The slat cleaner can be used on flatbed laser machines with pallet changers from any manufacturer. The machine differs from its predecessor with a new capacity plate, brush set, and vent holes. A steel brush set replaces the stripper plate used on the earlier model, resulting in longer tool life. New teeth from the rollers to gear, combined with vent holes for roller lubrication, help to extend tool life. The pinion shaft is made from one part, and the pin connection for torque transmission has been eliminated. The clutch has been reinforced with a bearing disc which results in better clutch guidance due to a bigger bearing dimension. The slat cleaner can be used on support slats from 0.08" to 0.15" thick. With its automatic forward feed, it cleans slag up to 0.6" thick off steel, stainless steel, and copper support slats operating at a speed of 26 to 32 fpm. Slats do not have to be removed for cleaning and on flatbed laser cutting machines with a pallet changer, cleaning can take place while production is running TRUMPF.

[ILLUSTRATION OMITTED]

WWW.rsleads.com/807mn-243