Transformers. (Medical Products).
The high-efficiency R-Core transformers use a high-quality, non-cut
silicon steel core. There are two matched bobbins on each side of the
core, which mutually cancel the other's magnetic flux . . .
Electric valves. (Medical Products).
Designed for a variety of chemical, biotechnology, medical and
environmental applications, these electric valves can be modified or
completely redesigned to meet individual requirements. . . .
Polymer tubing. (Medical Products).
PEEK polymer has been used in customized tubing for a new device to
cure acid reflux disease. It was chosen because of its high-temperature
and chemical resistance, toughness and strength. The . . .
Toroidal isolation transformers. (Medical Products).
The AW Series toroidal isolation transformers are designed for
medical applications. Featuring power ratings from 100 to 3000 VA at
50/60 Hz, they are recognized under one or both UL544 and . . .
Silicon carbide heater. (Medical Products).
The silicon carbide (SiC) heater is designed for use in process
chambers where rapid heating to high temperatures with low contamination
is necessary. Fabricated from high-purity chemical vapor . . .
RF enclosures. (Medical Products).
The Sliding Shielded Door (SSD) system is available in single- or
double-door versions. The pneumatically sealed SSD system features a
flat threshold for smooth patient transport. Each system . . .
Inert diaphragm valve. (Medical Products).
The inert diaphragm valve (IDV) is a solenoid-operated device
designed for use with corrosive or high-purity fluids commonly found in
the medical equipment industry. All surfaces in the flow path . . .
Manifold-mount isolation valves. (Medical Products).
Model KV-2 inert manifold mount isolation valves are
solenoid-operated, two-way, normally closed units that measure 6mm in
width. They are suitable for low-volume fluidic systems where reduction
of . . .
Receipt printer. (Medical Products).
The PIXI receipt printer is a graphics-capable thermal printer that
comes complete with 1 x [10.sup.6] cut paper cutter, control board,
paper supply and transport mechanisms as well as a long-life, . . .
Lithium coin cells. (Medical Products).
These lithium coin cells feature three volts of energy density in
small packages. They exhibit uniform discharge voltages and retain 90%
of their capacity in 10 years. Providing 35 mAHrs to 560 . . .
Chamber/load temperature sensor. (Medical Products).
The Sterisensor is a c h amber/load temperature sensor,
thermocouple or RTD assembly designed to withstand the environmental
conditions found in pharmaceutical autoclave chambers. . . .
Fluid handling components. (Medical Products).
These fluid handling components are custom-machined from a range of
ferrous and non-ferrous metals, including 316L stainless steel, titanium
and monel. Featuring [+ or -]0.5-deg. Cross-and end-axis . . .
Laser production system. (Medical Products).
The Smart Line Laser Production Center is available with a fully
automated vision system that adds more accuracy to laser cutting and
marking operations. This system may be taught to recognize . . .
Thermal print mechanisms. (Medical Products).
Featuring a low 15.5mm profile, the FTP-628 series high-speed,
battery-powered thermal print mechanisms are suitable for mobile and
hand-held terminals. They accommodate 58mm-wide paper with a . . .
Rubber parts. (Medical Products).
This company offers standard rubber lab stoppers and crutch tips
that can be customized to fit individual specifications. Lab stoppers
are available in solid, one-hole or two-hole sizes. . . .
Color video printer. (Medical Products).
The CP-900UM color video printer has print speeds of 10 seconds,
rendering it suitable for high-resolution, high-speed medical
applications. The sublimation thermal transfer printer provides . . .
Precision core pins. (Medical Products).
These custom-made core pins feature tolerances to 0.0005-in, on
length and 0.0001-in. on diameters. They are suitable for luer taper
component applications. Featuring multiple steps from 0.006- . . .
Precision machined components. (Medical Products).
These precision-machined components can be custom-manufactured from
stainless steel, titanium and brass in sizes ranging from 0.010- to
1.75-in. O.D. with holes down to 0.020-in., slots as thin as . . .
High-density interconnection manufacturing. (Medical
Products).
The automated RSVP Process allows the placement of fine-pitch
surface mount components between pins. It is completed in four stages:
routing, scoring, vibration vacuum and press. It was . . .
Casters. (Medical Products).
This high design caster features Tangerine tread for interior use.
It is available in three styles--swivel, fixed and Total Lock--as well
as in three sizes--80, 100 and 125mm. Wheel centers are . . .
|
|