British Columbia to permit 6-storey wood
construction.(CLIPPINGS)(Brief article)
New building codes permitting the use of wood-frame construction
for buildings up to six storeys tall are scheduled to take effect in
British Columbia in January 2009. The change, which raises the . . .
Management decisions in the forest products industry: where good
companies go astray.
[ILLUSTRATION OMITTED]
In the past two decades alone the forest products industry has
suffered in the face of what many observers would consider a series of
self-imposed disasters. Many of these . . .
Letter from the editor.(Editorial)
Dear Reader,
This month's feature article may make some readers
uncomfortable; some may recognize their own tendencies when making
decisions. Some may take exception to the suggestion that the . . .
Coming events.(Calendar)
October 1-3, 2008: Building Component Manufacturers Conference,
Colorado Convention Center, Denver. Contact 608-268-1161 or info@bcmc
show.com.
October 8-11, 2008: NHLA Annual Convention & . . .
A multisite field study of lean thinking in U.S. and German
secondary wood products manufacturers.
Abstract
Due to growing global competition, especially in the last decade,
the U.S. and German wood and wood-based industries have suffered
significant market share losses. To stay competitive in . . .
Separate-sided surface height measurement using a handheld
profiling device.(TECHNICAL NOTE)
Abstract
A novel and practical method for enhanced lumber dimension quality
control in a sawmill is presented. The method involves the use of a
handheld device that can be run along the length of . . .
On-site veneer production in short-rotation hybrid poplar
plantations.(Formula)
Abstract
A self-contained lathe that can be transported on highways and used
at roadside landings was tested at Boise Cascade Paper Solution's
hybrid poplar farm (now owned by GreenWood . . .
Temperature-duration effects on tensile properties of kenaf bast
fiber bundles.(Statistical table)
Abstract
This paper investigated heat and duration effects on the tensile
properties of kenaf bast fiber bundles (KBFB) as potential reinforced
fibers for polymer composites in automotive . . .
Elastic constants evaluated from plate tests compared to previous
bending tests.(Statistical table)
Abstract
Many different test methods have been used to evaluate the elastic
constants and elastic constant ratios of solid sawn lumber and
structural composite lumber (SCL). Previous work has . . .
A mechanical evaluation of Alaska-grown Sitka
spruce.(Formula)
Abstract
The results of a limited program of small, clear testing on an
available sample of Alaska-grown Sitka spruce (Picea sitchensis) are
reported. Performed at the Ketchikan Wood Technology . . .
A mechanical evaluation of Alaska-grown hemlock.
Abstract
The results of a limited program of small, clear testing on an
available sample of Alaska-grown hemlock are reported. Performed at the
Ketchikan Wood Technology Center in conjunction . . .
Long-term performance of engineered wood flooring when exposed to
temperature and humidity cycling.(Report)
Abstract
Engineered wood flooring (EWF) has an important market share of the
wood flooring in the United States (up to 52%). Many EWF products have
warranties of 15 to 35 years. In this study, . . .
Adsorption and desorption performance of two commercial wood
plastic composites.(Report)
Abstract
In this study, sorption and desorption of two wood plastic
composites (WPCs), along with solid southern pine, and white oak were
investigated in humidity controlled chambers. Equilibrium . . .
Chair load analysis during daily sitting activities.(TECHNICAL
NOTE)(Report)
Abstract
One of the greatest difficulties in chair design stems from the
fact that the act of sitting is usually studied as a static activity
rather than a dynamic one. With this in mind, this . . .
Estimation equations for moment resistances of L-type screw
corner joints in case goods furniture.(Report)
Abstract
The effects of the number of screws and screw sizes on bending
moment resistance of L-type furniture comer joints constructed of
particleboard (PB) and medium density fiberboard (MDF) . . .
Managing for innovation: insights into a successful
company.(innovation in forest product industry)
Abstract
This case explores work climate and its relation with
innovativeness in a small U.S. secondary wood products company. The
primary objective of this in-depth stage of a larger study was . . .
Letter from the editor.
Dear Reader,
In late August, The New York Times reported on the growing role of
consultants who specialize in advising architects and developers
regarding sustainable design and LEED . . .
Coming events.(Conference news)(Calendar)
August 20 - 23, 2008: International Woodworking Machinery and
Furniture Supply Fair, Georgia World Congress Center, Atlanta, Georgia.
Contact 404-693-8333 or visit www.iwfatlanta.com.
September 5 . . .
The influence of juvenile wood content on shear parallel,
compression, and tension perpendicular to grain strength and mode I
fr
Abstract
Forest products from improved trees grown on managed plantations
and harvested in short rotations will contain higher proportions of
juvenile wood than in current harvests. More . . .
The simultaneous treatment of compression drying and deformation
fixation in the compression processing of wood.
Abstract
The impact of holes drilled into air-dried wood specimens was
examined in a closed heating system on the deformation fixation process
of compressed wood. Holes were drilled into wood to . . .
|
|