Suitability of fibers from mountain pine beetle attacked wood in
wood-cement composite materials.
Abstract
This study used hydration tests to investigate the suitability of
fibers from mountain pine beetle (MPB) (Dendroctonus ponderosae
Hopkins.) infected wood for the production of . . .
Joint cost allocation in the sawmilling industry: four methods
for estimating raw material costs.
Abstract
When processing a sawlog, four main product groups are produced:
center boards, side boards, chips, and sawdust. In this kind of joint
production it is difficult to determine raw . . .
Application of GIS to estimate the availability of
Virginia's biomass residues for bioenergy production.
Abstract
Forest or agricultural residues are widely dispersed across large
geographical areas in Virginia, and there is little information on the
location and the quantity of these materials. . . .
A correction model for estimating jack pine tree-level lumber
recovery accurately using forest inventory data.
Abstract
This study proposes an approach to directly estimate lumber
recovery from individual trees using forest inventory measurements. In
this approach using tree measurements and taper . . .
An evaluation of loose tenon joint strength.
Abstract
The mortise and tenon (M&T) joint has been used in the
furniture industry in joints requiring high strength for many years.
Dowel joints are popular as well for their ease of . . .
Variation of impact bending in the wood of Pinus sylvestris L. in
relation to its position in the tree.
Abstract
The response of the wood of Pinus sylvestris L. to impact bending
using the Charpy method was studied in 2940 defect-free, oriented test
pieces from the central board of 10 trees felled . . .
Lateral and tensile resistances of glued face-to-face and
end-to-face joints in pine plywood and oriented strandboard.
Abstract
This study investigated the lateral shear and tensile load
resistances of glued face-to-face and end-to-face joints in southern
yellow pine plywood and oriented strandboard (OSB). . . .
Out-of-plane static bending resistance of gusset-plate and
metal-plated joints constructed of oriented strandboard for upholster
Abstract
Gusset-plate and metal-plated connectors are commonly used in
joints of upholstered furniture frames due to their high load
resistance. To successfully introduce oriented strandboard . . .
Particleboard performance requirements of secondary wood products
manufacturers in Canada.
Abstract
Particleboard (PB) is a widely used panelboard in value-added
applications. Unfortunately, machining problems sometimes occur in
practice when PB is used as a raw material that can be . . .
Forest certification descriptions as instruments for branding: an
exploratory analysis of U.S. supply chain members.
Abstract
The diversity of forest environmental certification schemes can be
confusing to consumers and may weaken the clarity of their message.
Certified forest product demand is partly . . .
U.S. home-center retailer attitudes, perceptions and behaviors
regarding forest certification.
Abstract
Forest certification continues to generate promise, discussion, and
debate. In this study, we surveyed the top 500 home-center retailers in
the United States to ascertain their . . .
Exploring research priorities for the North American hardwood
industry.(Industry overview)
With the increase of globalization the North American hardwood
industry is facing many challenges to remain competitive and
sustainable, facing drastic changes in the areas of labor, . . .
Letter from the editor.(Editorial)
Dear Reader,
This issue of the Forest Products Journal offers a few looks at
opinions. One article looks at the attitudes of forest products
retailers regarding sustainability certification; . . .
Coming events.(Calendar)
March 4 - 7, 2008: Hardwood Dry Kiln Operator's Short Course,
NC State University, Raleigh, North Carolina. For more information,
contact Joe Denig, NC State University at 919515-5582 . . .
Processing and characterization of urea/melamine formaldehyde
bound hazelnut shell flour composites.(Technical Note)(Statistical
Abstract
In this study, hazelnut shell flour bound with urea formaldehyde
(UF) and melamine formaldehyde (MF) adhesive resins was hot molded at
high pressures to manufacture composite boards. . . .
Solid wood and residue yield analysis of small-diameter red oak
logs.(Technical Note)
Abstract
A yield analysis of solid wood and residues from 233 red oak
small-diameter logs (6 to 10 inches small end d.i.b.) was conducted. The
results indicated that 75 percent of the 1-inch . . .
Firm size and competitive advantage in the U.S. upholstered, wood
household furniture industry.(Statistical table)
Abstract
This study is an empirical investigation of the relationships
between firm size, competitive strategy, competitive forces and
financial performance in the U.S. upholstered, wood . . .
Comparison of the effects of gamma irradiation and steam
sterilization on southern pine sapwood.
Abstract
Gamma irradiation is a commonly used method of sterilization of
wood specimens prior to decay testing. As part of a larger series of
studies, an investigation was made into the effects . . .
Wood-based lignosulfonate versus synthetic polycarboxylate in
concrete admixture systems: the perspective of a traditional pulpi
Abstract
A primary data survey was conducted to evaluate the market
potential of lignosulfonate as a raw material for plasticizers in the
concrete industries of Austria and southern Germany . . .
Determination of the color stability of an environmentally
friendly wood stain derived from laurel (Laurus nobilis L.) leaf
extr
Abstract
This study was designed to develop an environmentally friendly wood
stain derived from laurel (Laurus nobilis L.) and determine the color
stability of this stain when exposed to UV light . . .
|
|