Faro Technologies.(QUALITY/INSPECTION)
FARO Technologies Inc. has launched its all-new metrology software:
CAM2 Q.
[ILLUSTRATION OMITTED]
FARO's CAM2 Q has been built from the ground up with a CAD
translator and the Parasolid CAD . . .
Taiwan machining power on display at IMTS 2008.
TAIWAN ASSOCIATION OF MACHINERY INDU
Taiwan Association of Machinery Industry or TAMI is a group of
machinery industry manufacturers dedicated to promoting and building
Taiwan's machinery sector . . .
Trotec Laser.(WATERJET / LASERS / MANUFACTURING CELLS)
[ILLUSTRATION OMITTED]
Trotec's FP 100 has a host of new technologies, enabling
increased speed, flexibility, quality and longer product life. The FP
100 is a flatbed, gantry-based laser . . .
Big Kaiser Precision Tooling.(WORKHOLDING/TOOLHOLDING)
The Unilock Clamping System from BIG Kaiser Precision Tooling Inc.
helps reduce set-up time and part-processing time. Unilock's
clamping concept provides a comprehensive system to position and . . .
Sandvik Coromant.(CUTTING TOOLS)
[ILLUSTRATION OMITTED]
Sandvik Coromant's CoroMill 490, the first in a new family of
versatile shoulder milling tools, will cut the cost of face and shoulder
milling operations in small to medium . . .
Heavy duty swing clamps.(IMTS 08 Hall F)
Fixtureworks has launched a new series of Imao swing clamps that
provide approximately five times the clamping force of Imao's
standard swing clamp configurations. The heavy duty series of clamps . . .
Live tool square drives.(IMTS 08 Hall F)
SMW Autoblok's live tools feature gears with a square drive
for uniform torque, minimized backlash and reduced tool noise. The
special sealed, precision, dual-spindle bearings allow for even flow . . .
Adapters accept collects.(IMTS 08 Hall F)
Preci-Flex system adapters are available for standard mill/drill
operations, end milling, tapping, and shell mills. Collet chucks can be
adapted to reduce overhang and tool interference. The basic . . .
Production vises.(IMTS 08 Hall F)
Jergens Inc. has launched a new series of hydraulicpowered
production vises. The vises combine an innovative compact design with
jaw changeovers taking less than a minute to provide . . .
Five-axis clamping.(IMTS 08 Hall F)
A Kurt Workholding response to five-axis machining operations is a
new five-axis clamping system. It allows continuous five-axis cutting
motion of complex pockets, sculptured and contoured . . .
TiCN-coated tap.(IMTS 08 Hall F)
[ILLUSTRATION OMITTED]
Vega Tool Corporation's XTF Forming Tap is a high-performance
TiCN-coated tap geared toward high-speed tapping of stainless and carbon
steels.
XTF Forming Taps produce . . .
Face driver.(IMTS 08 Hall F)
LMC Workholding introduces the new Neidlein FBS MK5 face driver.
The FBS MK5 features a fixed center for high-quality turning and a
near-zero runout designed specifically for hard turning or . . .
Automatic positioning system.(IMTS 08 Hall F)
OML, S.p.A. has launched its Automatic Positioning System (APS), a
universal connection between the machine tool, the clamping device
and/or the workpiece that allows accurate positioning and . . .
New insert grades.(IMTS 08 Hall F)
Featuring a Super ZX multi-layered coating, the new grades AC510U
and AC520U from Sumitomo are a tool for roughing, finishing, and medium
cut machining of super alloy materials.
[ILLUSTRATION . . .
Rotary table.(IMTS 08 Hall F)
The Tsudakoma RTV-202 is a direct drive, ultra /A high-speed,
super-precision rotary table. The RTV-202 features a top speed of 150rpm
and indexing accuracy of [+ or -]5arc sec. A Fanuc servo motor . . .
Hydraulic toolholders.(IMTS 08 Hall F)
Schunk Inc. introduces new features to its hydraulic toolholders,
modifying its bestseller TENDO to be able to clamp different types of
cutting tools with cylindrical shanks directly in the . . .
Magnetic chucks.(IMTS 08 Hall F)
MagVISE EEPM (electro-permanent) chucks are used for normal and
heavy-duty drilling, milling, and boring operations on medium- or
large-sized workpieces. Rough and uneven stock can be held. A . . .
Clamping system.(IMTS 08 Hall F)
The Unilock Clamping System from BIG Kaiser Precision Tooling Inc.
can help reduce set-up time and part-processing time. Unilock's
clamping concept provides a system to position and clamp . . .
High-pressure vise.(IMTS 08 Hall F)
[ILLUSTRATION OMITTED]
The new Allmatic Titan 125 high-pressure vise combines almost all
the functions of Allmatic NC and T-REX.
It has a GGG 60 base with hardened and ground guideways to . . .
Grinding chucks.(IMTS 08 Hall F)
SAV North America, the recently established subsidiary of Spann
Automations Normteiletechnik (SAV) GmbH of Nuremberg, Germany, is
launching several new workholding lines in the United States, . . .
|
|