My Queue

There are no Videos in your queue.

Click on the Add to next to any video to save to your queue.

There are no Articles in your queue.

Click on the Add to next to any article to save to your queue.

There are no Podcasts in your queue.

Click on the Add to next to any podcast episode to save to your queue.

You're not following any authors.

Click the Follow button on any author page to keep up with the latest content from your favorite authors.

News and Trends / Innovation

Aluminum Foil Can Actually Improve Your Wireless Signal

Bust out the tinfoil, everyone.
Aluminum Foil Can Actually Improve Your Wireless Signal
Image credit: via engadget
2 min read
This story originally appeared on Engadget

If you've ever thought of resorting to aluminum foil to redirect your home's poor Wi-Fi signal, it turns out you're not actually that far off the mark. EurekAlert reported today that researchers at Dartmouth College have discovered that 3D printed signal reflectors, consisting of a thin layer of metal and plastic, can drastically and cheaply improve the wireless signal around a home.

These experiments were based off the idea of using an aluminum soda can behind a router in order to direct the signal away from deadening walls and other obstructions. The team was able to analyze a space and create a custom reflector that would optimize the Wi-Fi signal in that room. They then fed their data into a custom program called WiPrint that designed an optimal plastic reflector and created it using a 3D printer. The last step is to cover the object in aluminum foil and place it on the router. You can see a demonstration in the video below.

This solution solves multiple problems with Wi-Fi signals. First of all, it's inexpensive; if you have access to a 3D printer, it will only run you about $35. Directional antennas cost a lot more than that. Second, it allows you control over your Wi-Fi signal, which has more benefits than you think. Not only does it make sure you have signal in the rooms you need it in, but it allows you to cut off signal where you don't. This improves physical security, ensuring neighbors (and unsavory types) can't access your network.

The next step for the team is to figure out how to design reflectors that are made of a different material than 3D printed plastic. The idea is to eventually create an object that can actually change shape if the room's layout changes. This may not expand the coverage area of your router, but it will ensure that you'll get stronger signal in the areas you need it most.

How Visionary Leaders Create the Conditions for Innovation to Flourish